Hi All

I've searched through the board and not found any problems similar to mine.

Heres the setup:

Draytek 2920n - LAN IP - 192.168.80.254

1 x BT Infinity - WAN 1 (Fixed IP)
1 x Virgin Media 100 mbit residential connection - WAN 2 (Dynamic IP)

Servers / NAS - 192.168.80.1 through 192.168.80.20
Workstations - 192.168.80.50 through 192.168.80.100

I'd like to set it up to force all traffic from the server IP range through the fixed IP connection ie; WAN1

and the workstations IP range forced through the WAN2 connection.

Is this possible? or have any of you guys got it working? i feel a little dense asking this one.

Look forward to your responses.

Rob

Sometimes i should just read the manual. Load balancing policy did the trick, first bundle of IP's through WAN1 and the second set through WAN2 appears to be working.

Only time will tell how reliable this will be in the next few weeks.

Been working for me really well for last couple of weeks. I even set up a port 80 rule for my games pc. Port 80 to be used for WAN1 (VirgIn Media 30MB) so I can download at speed. All other ports to use WAN2 (Bethere ADSL2), which has better latency for gaming.

Am guessing i could do the same, just moving the rules up to the top of the list.