DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

slow 2830 on a new Fiber connection

More
28 Dec 2011 19:22 #70598 by rothers
Replied by rothers on topic Re: slow 2830 on a new Fiber connection
On the comparison link I posted, have a look at firewall throughput.

Please Log in or Create an account to join the conversation.

  • mattgg
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Dec 2011 21:25 #70600 by mattgg
Replied by mattgg on topic Re: slow 2830 on a new Fiber connection
Thanks Rothers.. Sad to see a 1gig port advertised but only a capacity to run at 50meg.. that's what I call false advertising

Please Log in or Create an account to join the conversation.

More
14 Jan 2012 15:51 #70768 by lozstlouis
Replied by lozstlouis on topic Re: slow 2830 on a new Fiber connection
That's 50 with the firewall packet inspection on!! Have to read and understand the specs.

www.alits.co.uk

Please Log in or Create an account to join the conversation.

More
16 Jan 2012 10:10 #70787 by psyman2000
Replied by psyman2000 on topic Re: slow 2830 on a new Fiber connection
I have been suffering the same, tried shutting down ALL VPN's, turning off the firewall completely and making sure all other load balancing and QOS are disabled and still speedtests come back as between 16 and 25mb/s down and less than 5mb/s up

If I bypass the 2830n-plus and go straight through the cable modem I get 104mb/s down and 9.89mb/s up (better than Virgin media advertise)

Very disapointing, I was prepared to lose 10mb on my download speed for the convenience of having dial out VPN's to a load of sites I look after but to lose 80% of my download and 50% of my upload doesnt make sense.

Any ideas on how to make the Gb WAN2 port true GB before I ditch it all together?

Please Log in or Create an account to join the conversation.

More
03 Feb 2012 11:53 #71069 by rj
Hi,

Please check the following topic : http://www.forum.draytek.co.uk/viewtopic.php?f=14&t=16898

Hope this helps. ;-)

regards,

rj

Please Log in or Create an account to join the conversation.

Moderators: Sami