I have had to reset my router to defaults recently, I'm trying to enter my forwarding rules, but none of them are working.
Even if I try DMZ nothing works. Even if I disable the firewall the ports are still closed.

I'm trying to forward 80 & 22 to 192.168.20.5

I have a 2700 adsl2+ router.

Index Service Name Protocol Public Port Private IP Private Port Active
1 git tcp 22 192.168.20.5 22 x
2 git udp 22 192.168.20.5 22 x
3 gitweb tcp 80 192.168.20.5 80 x

The reset has probably put back the Routers own interfaces for HTTP to port 80, FTP to 21/22 etc.

Anything listed on the built in Management, Web SSL, VPN set up etc. takes precedence, ahead of your forwarding fules.

So, you need to change the port clashes 20,21,22,23,80,443 to start off with. Even if you never intend to Telnet in to the Vigor, for example, you still must change it to allow your custom port forward fule to take effect.

Under Management Port Setup put the radio dot in User Define Ports and I would suggest:

• Telnet Port 8023
  HTTP Port 8080
  HTTPS Port 8043
  FTP Port 8021
  SSH Port 8022

Then your rules should kick in. Regards, Neal.