DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Can you change the 2820n's target snr margin?

dottedquad
Topic Author
Offline
Junior Member

16 Feb 2012 16:20 #71243 by dottedquad

Can you change the 2820n's target snr margin? was created by dottedquad

Can I telnet into my Vigor 2820n and change its target SNR margin?
If so, what's the command called?

TIA!

Please Log in or Create an account to join the conversation.

rj
Offline
Junior Member

16 Feb 2012 18:50 #71244 by rj

Replied by rj on topic Re: Can you change the 2820n's target snr margin?

Hi,

Check via CLI (Telnet) the following command :

adsl ?

regards,

rj

Please Log in or Create an account to join the conversation.

dottedquad
Topic Author
Offline
Junior Member

16 Feb 2012 22:38 #71247 by dottedquad

Replied by dottedquad on topic Re: Can you change the 2820n's target snr margin?

Thanks. I've done that, and there're lots of commands there, but none which seems to set target snr.

The 2820's manual doesn't help either (searching for telnet as a way to get info on these commands drew a blank).

Perhaps someone from Draytek can help here?

Please Log in or Create an account to join the conversation.

grantm
Offline
Junior Member

17 Feb 2012 14:07 #71253 by grantm

Replied by grantm on topic Re: Can you change the 2820n's target snr margin?

Have a look at the telnet guide on http://draytek.co.uk/support/downloads.html. The codinggain parameter might be the one.

Please Log in or Create an account to join the conversation.

dottedquad
Topic Author
Offline
Junior Member

20 Feb 2012 10:42 #71276 by dottedquad

Replied by dottedquad on topic Re: Can you change the 2820n's target snr margin?

Unfortunately, ADSL > codinggain isn't on the 2820n. It seems that it is only on 2800s.

Please Log in or Create an account to join the conversation.

Moderators: Sami