I have a 2850vn connected to two separate BT Infinity circuits, one business with a block of fixed IP addresses and the other home with a dynamic IP.

I've setup two separate subnets (LAN1 & LAN2) to keep my business equipment and home equipment segregated. What I would like to do is send business traffic (LAN1 192.168.1.0/24) out of WAN1 and home traffic (LAN2 192.168.2.0/24) out over WAN2.

I understand I can send certain types of traffic i.e. SMTP out over a specific WAN port but wanted to do this for al traffic from a specific subnet.

Is this possible?

thanks in advance,
Mark

OK - hands up this was an RTFM issue as I found out.

In order to split the traffic as I wanted I needed to enable load balancing and on the WAN>Load Balancing Menu enable policy one to put all traffic in the range 192.168.1.1/24 out of WAN1 and 192.168.1.2/24 out over WAN2.

I tested this by connecting to the respective wireless network on each subnet and checking with http://whatsmyip.org