Hello,

I am trying to setup an AP-800 for wireless access for staff at work and would like to use the in-built RADIUS server for security. I have gone to the security settings on the wireless LAN tab, selected a mode that includes 802.1x (WPA2/802.1x) but there is no option on the screen for PMK Cache. This is a setting shown in the manual but with firmware 1.1.1 and 1.1.2 it seems to be missing. Am I missing something elsewhere or can I not use the internal RADIUS server? Because I cannot set a PMK cache, the unit wont let me set-up any RADIUS authentication.

Thanks, Ian

Hi ... is not the same model (similar) so take a look this link if helps you
http://www.forum.draytek.co.uk/viewtopic.php?f=19&t=16406&p=70816&hilit=ap+800+radius+server#p70816
http://www.draytek.com/index.php?option=com_k2&view=item&id=2750&Itemid=293&lang=en
http://www.draytek.com/.upload/pdffiles/6aa97a8f2e7a1158dcae72d065ad65f1.pdf
http://www.draytek.com/index.php?option=com_k2&view=item&id=1913&Itemid=293&lang=en

Thanks for the help but it is not the RADIUS server that is the problem - AFAIK that is working just fine. The problem is getting the AP-800 to display the correct options on the Wireless security page so I can use the RADIUS server to authenticate users. The firmware seems to be missing the same settings as displayed in the manual

Ian

Isn't it under security and set up 802.x ????

Not in firmware 1.1.0 to 1.1.2

I have eventually got it working by setting up an ubuntu box as a RADIUS server on the network, using a mixed WPA / WPA2 / 802.1x network. This allows me to use the RADIUS server for authentication and I guess the built-in server doesn't work. Maybe with a future firmware upgrade????

Thanks for your help,

Ian

It's in mine with version 1.1.2
It's two places under radius where you setup users and then under wireless.