DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2760 & Vectoring

  • tacitus
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Feb 2015 10:41 #82730 by tacitus
2760 & Vectoring was created by tacitus
Anyone know if Firmware 3.7.5.4 on the 2760 supports vectoring? The VDSL2 firmware is 548006_A so is it this that would need updating for vectoring?

No doubt if it doesn't, there will be an update to either support it or make it 'vectoring friendly'.

Please Log in or Create an account to join the conversation.

More
20 Feb 2015 16:37 #82732 by babis3g
Replied by babis3g on topic Re: 2760 & Vectoring
yes it does support vectoring the 3.7.5.4
You can get it from here (after download you will see 2-3 folders) the ones named vector is the one you looking for
ftp://ftp.draytek.com/Vigor2760_Delight/Firmware/
You can also get & the latest 3.7.8 which has 2 vectoring firmwares
(if you update firmware needs the *rst* file extensions for a clean install)

The difference STD /Vector 1 / Vector 2 are the modem codes
http://www.draytek.com/index.php?option=com_k2&view=item&id=1226&Itemid=293&lang=en

Alternative in this link has firmware with the 2 vectoring firmwares for UK (down / last of the page)
http://www.draytek.com/index.php?option=com_k2&view=item&id=5435:vigor2760n-delight&Itemid=662&lang=en#downloads

Please Log in or Create an account to join the conversation.

  • tacitus
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Feb 2015 17:46 #82735 by tacitus
Replied by tacitus on topic Re: 2760 & Vectoring
Thanks babis3g. According to the release notes:-

"v2760_v1_378" and "v2760_v2_378" are used for supporting vectoring service. It is
designed specially for the ISP providing VDSL2 vectoring service. For IOP issue, you can choose "v2760_v1_378" or "v2760_v2_378" which has better VDSL performance with your ISP to use"


Looks like a case of trying each vectoring version to see which works best. As it happens, according to my ISP my line isn't enabled yet for vectoring so I'll just go with the standard UK V3.7.8

Please Log in or Create an account to join the conversation.

More
20 Feb 2015 18:07 #82737 by babis3g
Replied by babis3g on topic Re: 2760 & Vectoring
Is up to you ... there are few threads in the forum here about vector
Here find one with a quick search ... (different model from 2860 but both are same chipset & modem codes)
http://www.forum.draytek.co.uk/viewtopic.php?f=14&t=19888&start=20&hilit=vector
For me with adsl works good but as mentioned it all depending each line due to the different modem codes in each formware (STD/vector1/2)
The only issue vector has slower menus because there is another option called hardware acceleration but once disabled is fine (better)

The vector has also this extra menus
http://www.forum.draytek.co.uk/viewtopic.php?f=14&t=20006&p=82736&hilit=vector#p82733

EDIT
There is also 3.7.8 at UK download pages
http://www.draytek.co.uk/support/downloads
Have not tried them if the modem codes are different from main Taiwan .. i just stayed with the Taiwan ones & is fine for me

Please Log in or Create an account to join the conversation.

  • tacitus
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Feb 2015 18:30 #82739 by tacitus
Replied by tacitus on topic Re: 2760 & Vectoring

babis3g wrote:
The vector has also this extra menus
http://www.forum.draytek.co.uk/viewtopic.php?f=14&t=20006&p=82736&hilit=vector#p82733


Shame that menu isn't available on the standard version as it would be interesting to know what chipset was in the DSLAM. Back when I had a 2800, I know Draytek used to use Infineon but I'm not sure if that's true of the 2760/2860 series.

babis3g wrote:
There is also 3.7.8 at UK download pages
http://www.draytek.co.uk/support/downloads
Have not tried them if the modem codes are different from main Taiwan .. i just stayed with the Taiwan ones & is fine for me


Thanks. I think I'll stick to the UK version - at least for now. :)

Please Log in or Create an account to join the conversation.

More
20 Feb 2015 19:07 #82740 by babis3g
Replied by babis3g on topic Re: 2760 & Vectoring
2760/2860 use Lantiq (ex-infineon)

You still can see with the STD the dslam from the telnet menu top right looks like equalizer type (adsl show or show adsl)
At the button will show dslam vendor

> show adsl

ATU-R Info (hw: annex A, f/w: annex X)

Running Mode : ADSL2+ Annex A State : SHOWTIM
E
DS Actual Rate : 8224000 bps US Actual Rate : 988000 bps
DS Attainable Rate : 11308000 bps US Attainable Rate : 991000 bps
DS Path Mode : unknown US Path Mode : unknown
DS Interleave Depth : 0 US Interleave Depth : 0
NE Current Attenuation : 37 dB Cur SNR Margin : 14 dB
DS actual PSD : 18. 0 dB US actual PSD : 12. 1 dB
NE Rcvd Cells : 5060 NE Xmitted Cells : 6091
NE CRC Count : 0 FE CRC Count : 0
NE ES Count : 0 FE ES Count : 0
Xdsl Reset Times : 0 Xdsl Link Times : 1
ITU Version[0] : b5004946 ITU Version[1] : 544e0000
ADSL Firmware Version : 05-04-04-04-00-01
ATU-C Info

Far Current Attenuation : 19 dB Far SNR Margin : 9 dB
CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da188
DSLAM CHIPSET VENDOR : < BDCM >

Please Log in or Create an account to join the conversation.

Moderators: Sami