DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Question on problems with 2850Vn

allat39
Topic Author
Offline
Junior Member

24 Feb 2015 21:46 #82757 by allat39

Question on problems with 2850Vn was created by allat39

Hi,

I am having intermittent problems on my Vigor 2850Vn. Issues like intermittent rebooting.

Three Questions

1. First, I have carried out a Firmware update at least three times, resetting the unit back to clean defaults. However, the issue returns. Any suggestions?

2. Secondly, I would value clarification of what I should see in 'Station List' on a newly reset router.
I expected to see the usual Wifi devices around me - even if I have not added them to Access Control, but I see nothing.

3. Finally, adding devices to Access Control is normal practice. However, if I do not want to bind wifi addresses to the router, and instead want to leave it open to anything nearby being able to connect (with a password) what do I need to do differently? The reason I ask is that I seem only to be able to get things working if I obtain details of every Mac address and add it to Access Control.
I therefore think I have misunderstood, and I am doing something wrongly... unless there is a fault possibly.

Please Log in or Create an account to join the conversation.

babis3g
Offline
Dedicated Contributor

24 Feb 2015 23:52 #82758 by babis3g

Replied by babis3g on topic Re: Question on problems with 2850Vn

1-
Latest firmware is 3.6.6.1 ... what issues do you have? Just random reboots? if so what firmware is right now?

2-
I think to work the station list, you need first to scan to the ap discovery (a menu up)
http://www.draytek.com/index.php?option=com_k2&view=item&id=1954&Itemid=293&lang=en
if not have a look at this

MAC Address Locking. Each wireless PC will have a unique hardware ("MAC") address on its wireless interface (MAC is not 'Apple Mac' here). On the router you can specify the PCs which you will permit access to. A MAC address consists of 6 octets, e.g. AB F0 12 4F 12 32. If you select the router menu Wireless LAN Setup -> Station list, you can see all current visible clients. Add the PCs that you recognise and WLAN access will then be restricted. Once you add one MAC address to the router's Access Control list, all other WLAN clients must be included in the list.

https://www.draytek.co.uk/archive/kb_wlan_security.html

3-
if helps
https://www.draytek.co.uk/archive/kb_wlan_accesscontrol.html

Please Log in or Create an account to join the conversation.

allat39
Topic Author
Offline
Junior Member

25 Feb 2015 11:28 #82763 by allat39

Replied by allat39 on topic Question on problems with 2850Vn

delete this please

Please Log in or Create an account to join the conversation.

allat39
Topic Author
Offline
Junior Member

25 Feb 2015 16:36 #82770 by allat39

Replied by allat39 on topic Re: Question on problems with 2850Vn

babis3g wrote: 1-
Latest firmware is 3.6.6.1 ... what issues do you have? Just random reboots? if so what firmware is right now?

2-
I think to work the station list, you need first to scan to the ap discovery (a menu up)
http://www.draytek.com/index.php?option=com_k2&view=item&id=1954&Itemid=293&lang=en
if not have a look at this

MAC Address Locking. Each wireless PC will have a unique hardware ("MAC") address on its wireless interface (MAC is not 'Apple Mac' here). On the router you can specify the PCs which you will permit access to. A MAC address consists of 6 octets, e.g. AB F0 12 4F 12 32. If you select the router menu Wireless LAN Setup -> Station list, you can see all current visible clients. Add the PCs that you recognise and WLAN access will then be restricted. Once you add one MAC address to the router's Access Control list, all other WLAN clients must be included in the list.

https://www.draytek.co.uk/archive/kb_wlan_security.html

3-
if helps
https://www.draytek.co.uk/archive/kb_wlan_accesscontrol.html

Thanks babis3g

I wanted just to say thanks because the info was very helpful.....

During the evenings when everyone is around I am temporarily running the ISP's router - because it works ok. During the daytime I am investigating the issues with the Vigor.

I have had 3.6.6.1 installed since last autumn, but I repeated the firmware updates yet again, restoring to clean factory defaults, then ensured other settings were set to factory defaults.
I then temporarily disabled wifi security, and attempted to log on to the router from a computer.
The results were entirely different.
The router (although no configuration done) goes like a rocket with the internet speed showing at 6mb/s. Never, ever been so fast. (Usually 3.6 -4.2 maximum)

I will get back but in the meantime.. excellent help... thanks.

P.S. There is a very low number of video clips about 'Getting Started' with the Vigor, and configuring it. Is that because Draytek don't like it, no-one has the time, or it is deemed to be just so basic that it does not need one? I wondered whether to do one or two short 'Getting started' videos and put them on Youtube... ???

Please Log in or Create an account to join the conversation.

babis3g
Offline
Dedicated Contributor

25 Feb 2015 18:37 #82774 by babis3g

Replied by babis3g on topic Re: Question on problems with 2850Vn

i don't know why turning off the security is better, perhaps by default is slowing down the network, try also just wpa2 (not mixed wpa+wpa2)

What do you mean videos getting started? Buffering?
https://www.youtube.com/watch?v=Cjbry-mObCo

Please Log in or Create an account to join the conversation.

allat39
Topic Author
Offline
Junior Member

25 Feb 2015 20:29 #82775 by allat39

Replied by allat39 on topic Re: Question on problems with 2850Vn

babis3g wrote: i don't know why turning off the security is better, perhaps by default is slowing down the network, try also just wpa2 (not mixed wpa+wpa2)

What do you mean videos getting started? Buffering?
https://www.youtube.com/watch?v=Cjbry-mObCo

I will check out and see.

Oops...My bad grammar - sorry
- I meant to say 'Would it be a good idea for me to make a couple of short 5 minute videos: 'How to get started with the Vigor router' ... and put them on YouTube?
- As far as I can see there are some on unboxing, configuring different aspects, but none showing how to get up and running.
Just wondered if that would be useful - or totally unnecessary.

Please Log in or Create an account to join the conversation.

Moderators: Sami