babis3g wrote: If the 130 (or ANY modem brand modem) is in bridge mode & the router (ANY router) is via PPPoE ... then is not possible to access the web page

Draytek has a new option between draytek products where it allows you to see only the stats (valid for the vigor 130 & 120) not the WUi menus ... but need a vigor router & modem
http://www.forum.draytek.co.uk/viewtopic.php?f=3&t=20008#p82844

However i know a method that works with almost any modem router but IF you are using PORT Forward will have issues due to double NAT ... if you are not using port forward let me know to try adjust the 130 for your line

babis3g wrote: Double NAt is bad for port forward may not work

The only way i know to access the fully menu of the 130 is

Take it out of the bridge mode & set normal via PPPoE or PPPoA or depending the settings from your isp & set the username /pass at the 130
keep the same ip address 192.168.2.1 to the 130 so do not confict with the asus
Disable dhcp (lan general setup), port forward upnp, igmp, but keep the default firewall

At asos set it as router & choice the lan port as wan (you already know)
then wan > internet connection set it as static ip (wan connection type)
wan ip address
ip address 192.168.2.200
subnet mask 255.255.255.0 (if not works set this later to 255.255.255.255)
gateway 192.168.2.1
save

now connect the right cables vigor>asus>pc and reboot ALL ... it should work ... if you open a new tab 192.168.2.1 should have access to vigor & an other tab 192.168.1.1 should have access to asus