Hi,
I've set-up multiple Wi-Fi Lans SSIDs and VLAN's for said SSID'd on an AP-900's for a customer. So they have untagged 'staff' traffic and tagged guest traffic that can only access internet/emails/skype etc.
All using 2.4Ghz (5Ghz disabled)
Both of the Wi-Fi Lans are password protected and the 'staff' one is hidden
If however a member of the public was so inclined to climb up and plug an Ethernet Cable into one of the AP-900's free ports, they would have access to the 'staff' LAN.
Is there a way to prevent this. IE disable the ports not in use on the AP-900's :?:
The AP-900's connect to an 2830n Router via a P-1090 PoE switch. These are not an issue as locked away in a Staff Office
At another location it's not so critical as the AP-900's are physically hidden in loft spaces, but these are going to be exposed!
Thanks
Steve
