DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Can Vigor 2900 support 50Mb/s?

  • andrewc
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
09 Apr 2015 22:27 #83122 by andrewc
Can Vigor 2900 support 50Mb/s? was created by andrewc
My (Virgin) ISP has recently upgraded my cable connection from 20 to 50 MB/s.

I noticed that on broadband speed tests I am only getting 22 - 23 MB/s.

If I by-pass the Vigor and connect direct to the Virgin Superhub I do get 50MB/s.

Question is - do I need to replace my 10-year old Vigor 2900 or can it be tweaked up to support the new speed? and, if so, how?

The current firmware I have is 2.5.6

TIA
Regards
Andrew

Please Log in or Create an account to join the conversation.

More
10 Apr 2015 11:39 #83124 by babis3g
Replied by babis3g on topic Re: Can Vigor 2900 support 50Mb/s?
Via ethernet cable i am not sure .. the firewall i think is limited to 24 mbps, try turn off DoS, QoS if they are present (disable & the firewall for testing)
Via wifi it supports only G so that means the max speed is up to 54mbps, so if you are far from the modem may not expect the full speed
Ask the support or info@draytek.co.uk for more accurate answer (they reply fast)

If you need to replace it ... you can look the new vigor 2912n (same type hardware as the 2900) but ask for its throughput as well
or the latest 2925n ...
there is and the 2130n ( older model but with firmware up to date, so if ever update your VM service can go over 500 mbps)

Please Log in or Create an account to join the conversation.

  • andrewc
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Apr 2015 11:47 #83125 by andrewc
Replied by andrewc on topic Re: Can Vigor 2900 support 50Mb/s?
Hi Babis

Thanks for responding. The connection is hard wired so not a WiFi issue.

I saw an original review (2004) of the box at
http://www.tomsguide.com/us/draytek-vigor-2900g-broadband-security-router-reviewed-2900g,review-252-9.html

which suggests it is limited to 16MB/s.

As a matter of interest how would i turn off the Firewall component for testing?

Please Log in or Create an account to join the conversation.

More
10 Apr 2015 13:16 #83128 by babis3g
Replied by babis3g on topic Re: Can Vigor 2900 support 50Mb/s?
Thanks for the link

Advanced Setup > IP Filter/Firewall Setup > General Setup > call filter > data filter > disable ... then reboot if helps
I don't own this model but i think i got the right menus

Please Log in or Create an account to join the conversation.

  • andrewc
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Apr 2015 14:14 #83132 by andrewc
Replied by andrewc on topic Re: Can Vigor 2900 support 50Mb/s?
Hi Babis

I have now tried all your suggestions but sadly there is no difference in throughput.

I am thinking now that it must be a hardware limitation.

I have emailed Draytek as you suggested but I fully expect that they will tell me to buy a new box. To be fair 50Mb/s in 2004 would have been unheard of!

Thanks very much for your assistance anyway.

Please Log in or Create an account to join the conversation.

  • andrewc
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
12 Apr 2015 16:34 #83143 by andrewc
Replied by andrewc on topic Re: Can Vigor 2900 support 50Mb/s?
Draytek came back to confirm that it is a hardware limitation.

"Buy a new Vigor 2925".

Shame.

Please Log in or Create an account to join the conversation.

Moderators: Sami