DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Sipgate and plusnet settings 2820Vn

  • e-revelation
  • Topic Author
  • Offline
  • New Member
  • New Member
More
20 May 2009 23:14 #55926 by e-revelation
Sipgate and plusnet settings 2820Vn was created by e-revelation
Hi I am a Draytek nubie and can not get the voip settings to show as registered or work..
any one using Plus net phone service or sipgate on a 2820Vn ?
What settings are you using ?
do I need to set anything else other that the voip page settings ?
please help

Thanks
Mark

Please Log in or Create an account to join the conversation.

More
20 May 2009 23:39 #55927 by mikeytt
Replied by mikeytt on topic Sipgate and plusnet settings 2820Vn
I have literally just finished doing this tonight.

Settings I have as follows:

register via - Auto
don't check call with registration
SIP Port - 5060
domain/realm - sipgate.co.uk
proxy - sipgate.co.uk
act as outbound proxy unchecked
account number - your acc no
authentication id - don't check box and then enter your account no
password - your password
expiry - 1 hour
NAT traversal - none
ring port - I have both selected
Ring pattern - I am on 3, but I have 2 other SIP accounts which are on 1 and 2 respectively.

As soon as I ok it all I got a "R" status right away. Works a treat I must say. Thought it would be more difficult to set-up than it was.
Draytek Vigor 2820Vn
Firmware: 3.3.2.1_211801_A
Pipex Business (8Mb - Getting 3 - 3.5Mb)

Please Log in or Create an account to join the conversation.

  • e-revelation
  • Topic Author
  • Offline
  • New Member
  • New Member
More
21 May 2009 07:40 #55929 by e-revelation
Replied by e-revelation on topic thanks
Thanks Mickey

I had the authentication ID ticked and once I cleared that the sipgate one works fine.
just to crack Plus net ... :)

Mark

Please Log in or Create an account to join the conversation.

More
05 Jun 2009 20:34 #56222 by simonbrighton
Replied by simonbrighton on topic Sipgate and plusnet settings 2820Vn

MikeyTT wrote: I have literally just finished doing this tonight.

Settings I have as follows:

register via - Auto
don't check call with registration
SIP Port - 5060
domain/realm - sipgate.co.uk
proxy - sipgate.co.uk
act as outbound proxy unchecked
account number - your acc no
authentication id - don't check box and then enter your account no
password - your password
expiry - 1 hour
NAT traversal - none
ring port - I have both selected
Ring pattern - I am on 3, but I have 2 other SIP accounts which are on 1 and 2 respectively.

As soon as I ok it all I got a "R" status right away. Works a treat I must say. Thought it would be more difficult to set-up than it was.



I'm using 3 SIPGate accounts on my 2820vn also and they seem to work fine, except that the phone doesn't ring on an incoming call. If I see the "Phone 1" LED on the Draytek and pickup the phone everything is great...but it would be better if it rang!

Have you had any similiar problems with incoming calls?

Many thanks

Please Log in or Create an account to join the conversation.

More
09 Jun 2009 15:49 #56250 by mikeytt
Replied by mikeytt on topic Sipgate and plusnet settings 2820Vn
I have 3 accounts although not all sipgate. I've only tried using the sipgate account for incoming at present and that works a treat. I also have it set up to have the PSTN into the phone, which also works.

I don't have the splitter on my router, I only have 1 phone attached.

I would try removing 2 of the accounts and the splitter and see if you can get incoming to work at all. If it's still not ringing then maybe it's a phone problem or the phone setting? (I've set mine to UK, although I don't know if that's needed)

Hope you get it sorted, Mike...
Draytek Vigor 2820Vn
Firmware: 3.3.2.1_211801_A
Pipex Business (8Mb - Getting 3 - 3.5Mb)

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami