ghenry wrote:
Hi Gavin,
I tried this and still being blocked inbound. I have the 2 ATA's set to port 5060 - to external voip providers and then I can't connect back in to a Asterisk server via my external IP . If I set both ATA's to port 0 all is ok ! and I can connect via my IP address . I can also connect ok via the local IP 192.168.*.*
What did you try? You changed RTP ports to finish at 9999 and also set all "Sip Accounts" ports to 5081 or similar and then went to NAT and setup "open ports" for port 5002-5080 udp to go to your asterisk box and rtp udp 10000-20000?
Thanks.
Yes to all, apart from changing all "Sip Accounts" ports to 5081
Every works fine IF the ATA's (the built in ones) are not active i.e. set to port 0 as soon as I set them both back to 5060 (for my voip accounts) I can no longer log into my Asterisk box from the outside - via my IP address. The ATA's have nothing to do with the Asterisk side of things at the moment.
One thing I have just noticed is if turn off the ATA's (set to port 0) for a moment to let a soft-phone login to the Asterisk box THEN set the ATA's back to 5060 everything works ok. Its a pain but seems to work, not very satisfactory though ! If I then log out then try to log back in it times out error 408 - from eyebeam soft-phone
