DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2800 Will Not Let Me Post Forum Replies :?:

  • garththe1st
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Dec 2008 22:58 #53386 by garththe1st
Replied by garththe1st on topic Vigor 2800 Will Not Let Me Post Forum Replies :?:
I'll do that. Thanks a lot for your help.
:D

Please Log in or Create an account to join the conversation.

More
17 Dec 2008 12:23 #53420 by louis-m
Replied by louis-m on topic Vigor 2800 Will Not Let Me Post Forum Replies :?:
oh the dreaded talktalk mtu!
2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

More
13 May 2009 18:01 #55762 by engdev
Replied by engdev on topic Vigor 2800 Will Not Let Me Post Forum Replies :?:
To NJH

Thanks very much for your help. For the last 2 years I've been unable to run anything but the original firmware with Talktalk on my 2800VG, otherwise it wouldn't connect to gmail & others. By following your advice and using the DrTCP software everything works fine on the latest firmware. Great!

Please Log in or Create an account to join the conversation.

More
18 Dec 2009 18:38 #59413 by techpro
Replied by techpro on topic Vigor 2800 Will Not Let Me Post Forum Replies :?:
Thanks from me too. I have just switched over to TalkTalk Pro and have a 2800VG and could not access Gmail either. I tried reducing the MTU down to 1400 to no avail, and didn't think to go as low as 1200.

This has really made my day after about three hours of frustration, as although Gmail worked other things didn't with the router TalkTalk supplied.

Now if only the 2800VG could be as fast as TalkTalk's D-Link (only 11Mbit/s vs nearly 13Mbit/s.)

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami