DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 120

  • ldoodle
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 May 2009 09:23 #56099 by ldoodle
Vigor 120 was created by ldoodle
Hiya,

Just ordered one of these to use with ISA Server 2006. Can the ADSL username/password be configured on this modem, or does it have to be done on the connected device?

Thanks

Please Log in or Create an account to join the conversation.

More
29 May 2009 10:54 #56103 by louis-m
Replied by louis-m on topic Vigor 120
as far as i know, its a pppoe to pppoa bridge and therefore you set the credentials on your isa

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

  • ldoodle
  • Topic Author
  • Offline
  • New Member
  • New Member
More
04 Jun 2009 09:58 #56197 by ldoodle
Replied by ldoodle on topic Vigor 120
Can the sync speed be set at a maximum, like some Draytek routers?

I'm getting a couple of dropouts per day on PlusNet, and wonder if it's an unstable line.

Please Log in or Create an account to join the conversation.

More
04 Jun 2009 10:56 #56198 by louis-m
Replied by louis-m on topic Vigor 120
check how far you are away from the exchange which will give you an idea of what you should be receiving. from there, you can judge whether your line is bad and take action.

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

  • ldoodle
  • Topic Author
  • Offline
  • New Member
  • New Member
More
05 Jun 2009 12:54 #56211 by ldoodle
Replied by ldoodle on topic Vigor 120
Well the 120 shows i'm getting just under 8Mbps, but as said get a couple of dropouts so wouldn't mind dropping to say 5/6Mbps (or even 4Mbps) if I get a more stable line.

Distance is about 1.4 miles, though more than likely not length of cable.

Please Log in or Create an account to join the conversation.

More
05 Jun 2009 14:23 #56215 by louis-m
Replied by louis-m on topic Vigor 120
whats the snr?

2820 = 3.3.2_RC5
2950 = 3.2.4

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami