DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820vn Annex M
- busta999
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 49
- Thank you received: 0
06 Jul 2009 21:04 #56602
by busta999
2820vn Annex M was created by busta999
I am trying to get Annex M working and I cannot find any settings for it.
I am probably missing something obvious.
The websitehttp://www.draytek.co.uk/products/vigor2820.html says it supports Annex M and has dialup failover as well as support for USB drives.
I have gone over this again and again and cannot find this functionality.
I have the latest firmware : 3.3.1.2_232201 dated 12 May 2009.
Hopefully there is a new firmware I cannot find it, I have had this router now for about 6 weeks.
I am probably missing something obvious.
The website
I have gone over this again and again and cannot find this functionality.
I have the latest firmware : 3.3.1.2_232201 dated 12 May 2009.
Hopefully there is a new firmware I cannot find it, I have had this router now for about 6 weeks.
Please Log in or Create an account to join the conversation.
- macavity
- Offline
- Member
Less
More
- Posts: 225
- Thank you received: 0
07 Jul 2009 00:30 #56604
by macavity
Replied by macavity on topic AnnexM
It is a modulation setting in the PPPoA setup page. It's the second last entry in the drop down box.
WAN > Internet Access > WAN1 > PPPoA
WAN > Internet Access > WAN1 > PPPoA
Please Log in or Create an account to join the conversation.
- runningdeere
- Offline
- Junior Member
Less
More
- Posts: 97
- Thank you received: 0
07 Jul 2009 12:27 #56613
by runningdeere
Replied by runningdeere on topic 2820vn Annex M
You also need to make sure that Annexe M is enabled by your ISP or it won't work.
Please Log in or Create an account to join the conversation.
- busta999
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 49
- Thank you received: 0
08 Jul 2009 15:44 #56636
by busta999
Replied by busta999 on topic 2820vn Annex M
many thanks
Will try it
Will try it
Please Log in or Create an account to join the conversation.
- mawallace
- Offline
- Junior Member
Less
More
- Posts: 26
- Thank you received: 0
08 Jul 2009 17:22 #56642
by mawallace
Replied by mawallace on topic 2820vn Annex M
I had a probelm with Pipex - Annex M worked fine once they turned off "Interleaving" on the profile
Please Log in or Create an account to join the conversation.
- busta999
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 49
- Thank you received: 0
08 Jul 2009 17:30 #56644
by busta999
Replied by busta999 on topic 2820vn Annex M
ah ha,
I have set it up and the Draytek is reporting G.992.5 annexM but the upstream has gone down to 1300 and the downstream has gone down from 5700 to 4800.
My ISP shows I am connected at Annex A and interleaving is on. I'll try turning it off and turning Annex M again, the last two times it reverted to Annex A.
I have set it up and the Draytek is reporting G.992.5 annexM but the upstream has gone down to 1300 and the downstream has gone down from 5700 to 4800.
My ISP shows I am connected at Annex A and interleaving is on. I'll try turning it off and turning Annex M again, the last two times it reverted to Annex A.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek