I have moved to LLU on the cable and wireless network ex Bulldog, on day of migration my router lost speed from 7meg to 1meg on ADSL2+ settings.

Tests I have carried out show if I select ADSL2+ Auto or annex, the M the router loses 5meg plus of speed. Set router to mutimode and it connects at G.dmt at just over 6meg now but before even this was around 1meg.

Stats on ADSL BT network few hours before move.

---

ATU-R Info (annex A)

---

Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 7136000 bps US Actual Rate : 832000 bps
DS maximum Rate : 7136000 bps US maximum Rate : 832000 bps
DS Path Mode : Fast US Path Mode : Fast
NE Current Attenuation : 31.5 dB Cur SNR Margin : 9.0 dB
DS actual PSDM(C) : 00000000 US actual PSDM(R) : 00000000
ADSL Firmware Version : E.67.2.55

---

ATU-C Info

---

Far Current Attenuation : 17.5 dB Far SNR Margin : 13.0 dB
CO ITU Version[0] : 00000000 CO ITU Version[1] : 00000000
DSLAM CHIPSET VENDOR : < Unknown >

---

INTL, DSTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
, USTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
CODE, DSTREAM fast parity bytes= 0, fast codeword= 0.
DSTREAM intl parity bytes= 0, intl codeword= 0.
CODE, USTREAM fast parity bytes= 0, fast codeword= 0.
USTREAM intl parity bytes= 0, intl codeword= 0.
Setting>>
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.
Running>>
FDQ : Off, TCM : Off, EC : Off.
DS : Framing Mode 3, US : Framing Mode 3.
ADI ADSL Firmware Version: E.67.2.55

---

First stats on the LLU network same day.

adsl status

---

ATU-R Info (annex A)

---

Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 736000 bps US Actual Rate : 864000 bps
DS maximum Rate : 736000 bps US maximum Rate : 864000 bps
DS Path Mode : Fast US Path Mode : Fast
NE Current Attenuation : 33.5 dB Cur SNR Margin : 33.5 dB
DS actual PSDM(C) : 00000000 US actual PSDM(R) : 00000000
ADSL Firmware Version : E.67.2.55

---

ATU-C Info

---

Far Current Attenuation : 19.0 dB Far SNR Margin : 5.0 dB
CO ITU Version[0] : 00000000 CO ITU Version[1] : 00000000
DSLAM CHIPSET VENDOR : < Unknown >

---

INTL, DSTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
, USTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
CODE, DSTREAM fast parity bytes= 0, fast codeword= 0.
DSTREAM intl parity bytes= 0, intl codeword= 0.
CODE, USTREAM fast parity bytes= 0, fast codeword= 0.
USTREAM intl parity bytes= 0, intl codeword= 0.
Setting>>
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.

adsl status

---

ATU-R Info (annex A)

---

Running Mode : ADSL2+ State : SHOWTIME
DS Actual Rate : 1776900 bps US Actual Rate : 807800 bps
DS maximum Rate : 1776900 bps US maximum Rate : 807800 bps
DS Path Mode : Interleave US Path Mode : Interleave
NE Current Attenuation : 17.0 dB Cur SNR Margin : 10.0 dB
DS actual PSDM(C) : 00000000 US actual PSDM(R) : 00000000
ADSL Firmware Version : E.67.2.55

---

ATU-C Info

---

Far Current Attenuation : 20.0 dB Far SNR Margin : 11.0 dB
CO ITU Version[0] : 00000000 CO ITU Version[1] : 00000000
DSLAM CHIPSET VENDOR : < Unknown >

---

INTL, DSTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
, USTREAM bytes/depth= 0, symbols/codewords = 0, latency= 0*0.25ms.
CODE, DSTREAM fast parity bytes= 0, fast codeword= 0.
DSTREAM intl parity bytes= 0, intl codeword= 0.
CODE, USTREAM fast parity bytes= 0, fast codeword= 0.
USTREAM intl parity bytes= 0, intl codeword= 0.
Setting>>
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.
Running>>
FDQ : Off, TCM : Off, EC : Off.
DS : Framing Mode 3, US : Framing Mode 3.
ADI ADSL Firmware Version: E.67.2.55

---

Speed tests did verify the speed drop on LLU network I was trying to get the router to update firmware to see if this improves the speeds but this asks to abort time out. So where next cannot afford another Draytek bought this as it was advertised as ADSL2+ compatible as knew I would be moving from ADSLmax within 2 years. This router was bought when I moved from cable to ADSL just over 12 months ago.

Any help to find how to upgrade this would help first before I give up and go looking for a replacement router.