DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IP Pool Count Question

  • gibletmcshannon
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Jul 2009 12:15 #56711 by gibletmcshannon
IP Pool Count Question was created by gibletmcshannon
Hello,

If my start IP address is...

04.567.89.2

and id like to maximise fully on IP Pool counts,

whats the highest figure I can put in the IP Pool count box?

is it 97 ?

which would take me up to 04.567.89.99

Thanks in advance

Nigel

Please Log in or Create an account to join the conversation.

More
14 Jul 2009 12:26 #56714 by runningdeere
Replied by runningdeere on topic IP Pool Count Question
Assuming you use a 'standard' private IP range such as 192.168.1.xxx

Then, you would set your start IP at something like 192.168.1.10 (with your router on 1.1)
There are a maximum of 256 IP's in a subnet, although 0 and 255 are reserved, so the max you can go to is 254.
So in the example above, you could in theory set the IP pool count to 245 (10 - 254 inclusive)

Unless you really need huge numbers of addresses, I would set your range to start at perhaps 100 and set a pool size of 100

Please Log in or Create an account to join the conversation.

  • gibletmcshannon
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Jul 2009 14:24 #56717 by gibletmcshannon
Replied by gibletmcshannon on topic IP Pool Count Question
Very helpful. Thanks alot for that.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami