DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820 with 3.3.2.1 VPN issues
- benji
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 44
- Thank you received: 0
01 Sep 2009 09:59 #57491
by benji
Any idea what the story is these days on restoring a config file backup onto newer firmware? Its a shame they cant make the config file "human readable" at least...
Replied by benji on topic 2820 with 3.3.2.1 VPN issues
I haven't heard back from them yet, but they said that it is best to upgrade your modem firmware with the .rst file so that the machine is fully reset.
Any idea what the story is these days on restoring a config file backup onto newer firmware? Its a shame they cant make the config file "human readable" at least...
Please Log in or Create an account to join the conversation.
- flippin
- Offline
- Junior Member
Less
More
- Posts: 13
- Thank you received: 0
01 Sep 2009 10:09 #57492
by flippin
Replied by flippin on topic 2820 with 3.3.2.1 VPN issues
I am not sure myself, as usual I just don't have the time to experiment with these things.
As soon as I have a quiet hour, I may restore the new firmware .rst version and load up my old config.
I just figured that that would be the same as doing the .all firmware restore.
Doing a .rst and setting the router up manually is a pain - as we don't use radius and users will have to set up passwords again.....
As soon as I have a quiet hour, I may restore the new firmware .rst version and load up my old config.
I just figured that that would be the same as doing the .all firmware restore.
Doing a .rst and setting the router up manually is a pain - as we don't use radius and users will have to set up passwords again.....
Please Log in or Create an account to join the conversation.
- flippin
- Offline
- Junior Member
Less
More
- Posts: 13
- Thank you received: 0
06 Sep 2009 11:13 #57598
by flippin
Replied by flippin on topic 2820 with 3.3.2.1 VPN issues
i reflashed with latest firmware using the .rst file and reloaded settings.
Connected to a vpn and after several minutes - I got the disconnection again.
Connected to a vpn and after several minutes - I got the disconnection again.
Please Log in or Create an account to join the conversation.
- benji
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 44
- Thank you received: 0
07 Sep 2009 09:39 #57609
by benji
Replied by benji on topic 2820 with 3.3.2.1 VPN issues
I am going to report this as a bug to Draytek (though that shouldnt stop anyone else doing the same if they want to, they sometimes give out a test firmware so more testers might be useful!)
Please Log in or Create an account to join the conversation.
- flippin
- Offline
- Junior Member
Less
More
- Posts: 13
- Thank you received: 0
07 Sep 2009 10:03 #57610
by flippin
Replied by flippin on topic 2820 with 3.3.2.1 VPN issues
i reported it as a bug also, I haven't heard anything back from them yet. I sent a link to the forums posts in it also.
Please Log in or Create an account to join the conversation.
- benji
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 44
- Thank you received: 0
08 Sep 2009 10:03 #57627
by benji
Replied by benji on topic 2820 with 3.3.2.1 VPN issues
I got a response, an apology and a workaround in <24 hours!
It does sound like maybe a previously listed firmware "fix" in 3.3.2+ has actually caused this to me (Fixed: VPN DPD disconnect from remote side.)
http://en.wikipedia.org/wiki/Dead_Peer_Detection
It does sound like maybe a previously listed firmware "fix" in 3.3.2+ has actually caused this to me (Fixed: VPN DPD disconnect from remote side.)
Thank you for your email.
It's a known issue and we will try our best to resolve it soon.
For the moment, please run "ping -t" to one of remote vpn node so that there is continuous vpn traffic.
Thank you very much for your report and sorry for the inconvenience we may make.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek