DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Access to Status pages on 120
- pcmanning
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
26 Aug 2009 10:09 #57399
by pcmanning
Access to Status pages on 120 was created by pcmanning
Hi there, got my replacement 120 which now syncs way faster than my old Cisco. Anyway, it's doing PPPoE from a Linksys AP (running the DRT firmware). So the AP gets an address from the ISP 212.X.Y.Z and NATs as normal. The AP's internal address is 192.168.2.254 and the 120 is 192.168.2.1 - any way of getting access to the 120's status pages/telnet from the internal network while it's connected to the AP.
cheers
Paul
cheers
Paul
Please Log in or Create an account to join the conversation.
- briandm
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
01 Sep 2009 17:47 #57501
by briandm
If it's like the Vigor 100 then you can run a second cat5 cable to it from the router and then you can talk to it on its LAN IP.
Replied by briandm on topic Re: Access to Status pages on 120
Hi there, got my replacement 120 which now syncs way faster than my old Cisco. Anyway, it's doing PPPoE from a Linksys AP (running the DRT firmware). So the AP gets an address from the ISP 212.X.Y.Z and NATs as normal. The AP's internal address is 192.168.2.254 and the 120 is 192.168.2.1 - any way of getting access to the 120's status pages/telnet from the internal network while it's connected to the AP.pcmanning wrote:
cheers
Paul
If it's like the Vigor 100 then you can run a second cat5 cable to it from the router and then you can talk to it on its LAN IP.
Please Log in or Create an account to join the conversation.
- pcmanning
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
01 Sep 2009 18:32 #57504
by pcmanning
Replied by pcmanning on topic Access to Status pages on 120
sadly not one lan port. Might be able to do something with a switch i guess.
Paul
Paul
Please Log in or Create an account to join the conversation.
- rothers
- Offline
- Member
Less
More
- Posts: 143
- Thank you received: 0
- pcmanning
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
02 Sep 2009 08:35 #57514
by pcmanning
Why won't a switch work? I've got a scheme to use my ESX server virtual switch to connect a VM to monitor the vigor?
Paul
Replied by pcmanning on topic Access to Status pages on 120
use a hubrothers wrote:
Why won't a switch work? I've got a scheme to use my ESX server virtual switch to connect a VM to monitor the vigor?
Paul
Please Log in or Create an account to join the conversation.
- rolandrat
- Offline
- Member
Less
More
- Posts: 200
- Thank you received: 0
03 Sep 2009 09:03 #57547
by rolandrat
Replied by rolandrat on topic Access to Status pages on 120
You can use a switch but if you run syslog then it shows endless stream of trace route and fraggle attacks in firewall log.
I dont know if a hub would cause the same.
I dont know if a hub would cause the same.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek