DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Access to Status pages on 120

  • pcmanning
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 Aug 2009 10:09 #57399 by pcmanning
Access to Status pages on 120 was created by pcmanning
Hi there, got my replacement 120 which now syncs way faster than my old Cisco. Anyway, it's doing PPPoE from a Linksys AP (running the DRT firmware). So the AP gets an address from the ISP 212.X.Y.Z and NATs as normal. The AP's internal address is 192.168.2.254 and the 120 is 192.168.2.1 - any way of getting access to the 120's status pages/telnet from the internal network while it's connected to the AP.

cheers
Paul

Please Log in or Create an account to join the conversation.

More
01 Sep 2009 17:47 #57501 by briandm
Replied by briandm on topic Re: Access to Status pages on 120

pcmanning wrote: Hi there, got my replacement 120 which now syncs way faster than my old Cisco. Anyway, it's doing PPPoE from a Linksys AP (running the DRT firmware). So the AP gets an address from the ISP 212.X.Y.Z and NATs as normal. The AP's internal address is 192.168.2.254 and the 120 is 192.168.2.1 - any way of getting access to the 120's status pages/telnet from the internal network while it's connected to the AP.

cheers
Paul



If it's like the Vigor 100 then you can run a second cat5 cable to it from the router and then you can talk to it on its LAN IP.

Please Log in or Create an account to join the conversation.

  • pcmanning
  • Topic Author
  • Offline
  • New Member
  • New Member
More
01 Sep 2009 18:32 #57504 by pcmanning
Replied by pcmanning on topic Access to Status pages on 120
sadly not one lan port. Might be able to do something with a switch i guess.

Paul

Please Log in or Create an account to join the conversation.

More
01 Sep 2009 19:13 #57505 by rothers
Replied by rothers on topic Access to Status pages on 120
use a hub

Please Log in or Create an account to join the conversation.

  • pcmanning
  • Topic Author
  • Offline
  • New Member
  • New Member
More
02 Sep 2009 08:35 #57514 by pcmanning
Replied by pcmanning on topic Access to Status pages on 120

rothers wrote: use a hub



Why won't a switch work? I've got a scheme to use my ESX server virtual switch to connect a VM to monitor the vigor?

Paul

Please Log in or Create an account to join the conversation.

More
03 Sep 2009 09:03 #57547 by rolandrat
Replied by rolandrat on topic Access to Status pages on 120
You can use a switch but if you run syslog then it shows endless stream of trace route and fraggle attacks in firewall log.
I dont know if a hub would cause the same.

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami