DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Reboot Problems with 2820n
- davegarratt
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 38
- Thank you received: 0
21 Oct 2009 05:57 #58394
by davegarratt
Reboot Problems with 2820n was created by davegarratt
I've yet to find a version of firmware which doesn't have some issue. However even the most reliable version I've found still reboots every 2 or 3 days. Can anyone interpret this for me.
> sys ver dbg
Router Model: Vigor2820 series Version: 3.3.1.2_232201 English
Profile version: 3.0.0 Status: 1 (0x49c73054)
Router IP: 192.168.3.1 Netmask: 255.255.255.0
Firmware Build Date/Time: May 12 2009 14:42:43
Revision: 11917 2820_V331
ADSL Firmware Version: 232201_A Annex A
fimrware exception debug info
EPC=80335f58, Cause=30000028, Status=1000ff03, BadAddr=00000008
exception id=10(RI: Reserved Instruction)
exception occured in TASK level, task_id=161, SP=0x80787008(11036 bytes free, 0 used bytes)
system tick =132519829
CURRENT_VERSION : 3.3.1.2_R
>
> sys ver dbg
Router Model: Vigor2820 series Version: 3.3.1.2_232201 English
Profile version: 3.0.0 Status: 1 (0x49c73054)
Router IP: 192.168.3.1 Netmask: 255.255.255.0
Firmware Build Date/Time: May 12 2009 14:42:43
Revision: 11917 2820_V331
ADSL Firmware Version: 232201_A Annex A
fimrware exception debug info
EPC=80335f58, Cause=30000028, Status=1000ff03, BadAddr=00000008
exception id=10(RI: Reserved Instruction)
exception occured in TASK level, task_id=161, SP=0x80787008(11036 bytes free, 0 used bytes)
system tick =132519829
CURRENT_VERSION : 3.3.1.2_R
>
Please Log in or Create an account to join the conversation.
- rothers
- Offline
- Member
Less
More
- Posts: 143
- Thank you received: 0
- davegarratt
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 38
- Thank you received: 0
21 Oct 2009 12:15 #58400
by davegarratt
Replied by davegarratt on topic Reboot Problems with 2820n
I've noticed (mainly through checking the uptime) that the router appears to reset about every 3-4 days. Sometimes it goes unnoticed, other times it seems to happen at the same time as a new wireless connection is established.
Please Log in or Create an account to join the conversation.
- rehman
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
25 Oct 2009 23:32 #58473
by rehman
Replied by rehman on topic Reboot Problems with 2820n
I had the same problem. Technical guy from Draytek asked me to use beta firmware verion 3.3.3_RC5B. It seems like this version has solve the problem.
Please Log in or Create an account to join the conversation.
- davegarratt
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 38
- Thank you received: 0
26 Oct 2009 07:36 #58475
by davegarratt
Replied by davegarratt on topic Reboot Problems with 2820n
I have tried 333 RC5b, but that has the problem where access to the web admin page seems to disappear or at least only work partially after the router has been up for 24+ hrs.
If that version is working ok for you then perhaps we should compare our configs.
I am using WPA/WPA2 across 802.11b/g/n with MAC address reservation but no access control.
I am using a constantly active VPN connection to my office using the VPN lan to lan option.
I have also defined a DMZ for a XBOX my son uses.
90% of my devices connect wirelessly.
Dave
If that version is working ok for you then perhaps we should compare our configs.
I am using WPA/WPA2 across 802.11b/g/n with MAC address reservation but no access control.
I am using a constantly active VPN connection to my office using the VPN lan to lan option.
I have also defined a DMZ for a XBOX my son uses.
90% of my devices connect wirelessly.
Dave
Please Log in or Create an account to join the conversation.
- rehman
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
26 Oct 2009 18:55 #58492
by rehman
Replied by rehman on topic Reboot Problems with 2820n
I use access control for WiFi (enter MAC addrsss of NIC to gain access for WiFi) and 3 Lan to Lan VPN tunnels running simultaniously. No DMZ but do have port forwarding for NAT
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek