DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 "show adsl" interleave values always zero v3.

  • cfmorley
  • Topic Author
  • Offline
  • New Member
  • New Member
More
30 Jun 2010 08:39 #1 by cfmorley
2820 "show adsl" interleave values always zero v3. was created by cfmorley
Hi,

Is there an issue with the new 3.3.4 firmware for the 2820? I have interleave forced on my line yet after the upgrade "show adsl" only displays zero which seems highly improbable. (Typically 64 DS & 8 US with 3.3.3)

Code:
--------------------------- ATU-R Info (hw: annex A, f/w: annex A) ----------- Running Mode : ADSL2(G.992.3) State : SHOWTIME DS Actual Rate : 5048888 bps US Actual Rate : 834000 bps DS Attainable Rate : 4960000 bps US Attainable Rate : 1286832 bps DS Path Mode : Interleave US Path Mode : Interleave DS Interleave Depth : 0 US Interleave Depth : 0 NE Current Attenuation : 47 dB Cur SNR Margin : 5 dB DS actual PSD : 19. 0 dB US actual PSD : 12. 6 dB ADSL Firmware Version : 232201_A -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 29 dB Far SNR Margin : 5 dB CO ITU Version[0] : 00005453 CO ITU Version[1] : 00005443 DSLAM CHIPSET VENDOR : < TI >


Thanks, Chris

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami