DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 120 line stats?

ianjohnston
Topic Author
Offline
Junior Member

23 Sep 2010 18:09 #1 by ianjohnston

Vigor 120 line stats? was created by ianjohnston

Hi all,

I have a Vigor 120 connected to my 2820n via WAN2.

Is there any way to see the 120's line stats, i.e. SNR Margin & Loop Attenuation.

Ian.

Please Log in or Create an account to join the conversation.

kelvin
Offline
Junior Member

04 Oct 2010 12:17 #2 by kelvin

Replied by kelvin on topic Vigor 120 line stats?

Yes. You can telnet to the device and try the following.



Code:

$ telnet adsl
Trying xxxxxxxxx...
Connected to adsl.
Escape character is '^]'.


Password: ********

Type ? for command help

> adsl status
  --------------------------- ATU-R Info (hw: annex A, f/w: annex A) -----------
   DSL Modulation          : ADSL2+(G.992.5)    
   State                   : SHOWTIME
   DS Actual Rate          : 15096888 bps   US Actual Rate       :   888888 bps
   DS Attainable Rate      : 15076000 bps   US Attainable Rate   :   888000 bps
   DS Path Mode            :  Interleave    US Path Mode         :  Interleave 
   DS Interleave Depth     :       64       US Interleave Depth  :        8 
   NE Current Attenuation  :       34 dB    Cur SNR Margin       :        6  dB
   DS actual PSD           :    20. 6 dB    US actual PSD        :    11. 6   dB
   ADSL Firmware Version   : 332201_A 
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :       14 dB    Far SNR Margin       :       13  dB
   CO ITU Version[0]       : 00004946       CO ITU Version[1]    : 0000544e
   DSLAM CHIPSET VENDOR    : < IFTN >
>

Hope this helps.

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami