So am I right in assuming that this update has broken pro update speeds (2.4 ish meg) on Be Pro?

Sory to be so straight about this but I am quite annoyed - so much so that my next router will no be Draytek...............

I too noticed this issue recently when I upgraded. I usually get the full 24Mbit down and 2.5 up.

Installing 3.3.4.1 seems to have changed the MTU setting for some people. If you adjust your MTU down your speed should return.

Thanks Howard.

Do you know what it has changed from and to so I can correct it?

I changed from FW 3.3.3 to 3.3.4.1.

Thanks very much..

Try 1442 but also see this post http://www.forum.draytek.co.uk/viewtopic.php?t=14881&start=30

Thanks for your help Howard.

Tried all sorts for over 2 hours but no good.

Got a copy of 3.3.5 RC2a and all my problems just went away. (not that I use the advanced features.. :shock: )

3.3.4.1 is definitly busted. Not good. Upload on BE Pro annex M is capped at 1.1 Mbit with this firmware version.....

Thanks again for your help.

Dennis.