DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
How to upgrade Vigor120 in PPPoE pass-through mode?
- njharris
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
21 Nov 2010 18:31 #64964
by njharris
How to upgrade Vigor120 in PPPoE pass-through mode? was created by njharris
Hi,
Hopefully the subject line covers it!:?
I have a Vigor120 connected to an Apple Airport Extreme, which is in turn connected to my desktop (Mac Pro) via Ethernet.
To upgrade the firmware to deal with a known conflict between the Vigor120 and Apple's iChat application, so I need to connect Mac Pro > 120 directly?
If so, what will the modem's IP be?
Thanks for any suggestions.
Hopefully the subject line covers it!
I have a Vigor120 connected to an Apple Airport Extreme, which is in turn connected to my desktop (Mac Pro) via Ethernet.
To upgrade the firmware to deal with a known conflict between the Vigor120 and Apple's iChat application, so I need to connect Mac Pro > 120 directly?
If so, what will the modem's IP be?
Thanks for any suggestions.
Please Log in or Create an account to join the conversation.
- nealuk
- Offline
- Member
Less
More
- Posts: 465
- Thank you received: 0
22 Nov 2010 13:02 #64975
by nealuk
Replied by nealuk on topic How to upgrade Vigor120 in PPPoE pass-through mode?
192.168.2.1 - you may need to give yourself a fixed IP address of something like 192.168.2.10 so that you can see the Vigor 120.
Regards,
Neal.
Regards,
Neal.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek