DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2710vdn multiple public IP

  • paul_72
  • Topic Author
  • Offline
  • New Member
  • New Member
More
04 Dec 2010 13:40 #65146 by paul_72
2710vdn multiple public IP was created by paul_72
Afternoon all,

How can I configure the 2710vdn to use multiple public IP addresses?

The reason I ask is I am considering getting a few more IPs from my provider, Zen, in order that I can host more than one web server at home. I know I could use multiple port mappings to different ports but this won't work nicely.

In essence what I want to do is:
Public IP A, http & https > Private web server 1
Public IP B, http & https > Private web server 2

Is this possible with the 2710vdn and if so how?

Paul

Please Log in or Create an account to join the conversation.

More
05 Dec 2010 11:09 #65158 by admin
Replied by admin on topic 2710vdn multiple public IP
It is not supported; it will allow NAT routing only.

http://www.draytek.co.uk/products/vigor2710vdn.html
http://www.draytek.co.uk/products/comparison.html

Forum Administrator

Please Log in or Create an account to join the conversation.

  • paul_72
  • Topic Author
  • Offline
  • New Member
  • New Member
More
05 Dec 2010 12:05 #65162 by paul_72
Replied by paul_72 on topic 2710vdn multiple public IP
Blast that is not what I wanted to hear.

Please Log in or Create an account to join the conversation.

More
10 Jan 2011 13:27 #65561 by pharm
Replied by pharm on topic 2710vdn multiple public IP
If you poke the internal (command line) interface then it works perfectly well. The functionality just isn't exposed in the web interface.

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami