Hi Expert

Recently I bought DrayTek Vigor 2710n and when I tried to change source ip and destination ip to suit my requirement under Firewall --> Filter Setup, it was not editable ( can not be rewritten )

please see the snapshot below :

http://img84.imageshack.us/i/forumfirewall.jpg/




http://img211.imageshack.us/img211/7067/singleipaddressisgrayed.jpg




What I am looking is to be able to type in an ip address as shown in the image below ( this is from Vigor 2820 not from mine 2710n)

http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_26594395.html

http://img233.imageshack.us/i/blockrule.jpg




Thanks

Please any help or comment

Thanks

Of course, this should be possible.
Have you:
- tried to use a different browser using default settings (scripting on especially)
- check the enable filter rule checkbox before pushing the edit button
- start with an empty firewall profile instead of editing an existing

I dont have this kind of vigor for testing, however I had a strange thing with a brand new 2930: the standard filter set (1 and 2) presets by the manufacturer refuse editing/deleting at all. But using an empty filter set worked.

Thanks no body

I will try what you have suggested and let you know

Thanks

FF4 beta 9 onwards causes some screens not to function correctly on my 2820Vn (they work fine in IE8/Chrome/FF3.6.x however).

tried to use a different browser using default settings

Thanks that fixed the problem