Hello,
Currently I am connecting to the internet through an Orange LiveBox, and upon further investigation the orange live box uses PPPoA for the dsl line but PPPoE to connect to the service..
Is there any way to use telnet/SSH to configure the draytek vigor 2710n to use more than one iface (interface) to connect to the net getting around the old problem I am currently having that the draytek does not know 'how to' connect to Orange as an ISP.
Any help would be greatly appreciated as I'm stuck. Although technically sound and quite knowledgeable on these matters I have no idea how to string interfaces together or even create new virtual apdapters to put in a bridge for the DSL connection.
Outlined below is the Orange Interfaces:
Code:
Name LAN Ethernet LAN Bridge WAN DSL WAN ETHoA LAN USB LAN Wireless 802.11g Access Point WAN ETHoA 7 WAN PPPoE
Device Name eth0 br0 dsl0 ethoa4 usb0 eth1 ethoa6 ppp0
Status Connected Connected Connected Connected Disconnected Disabled Connected Connected
Network LAN LAN WAN WAN LAN LAN WAN WAN
Underlying Device LAN Ethernet
LAN USB
LAN Wireless 802.11g Access Point WAN DSL WAN DSL WAN ETHoA 7
Connection Type Ethernet Bridge DSL ETHoA USB Wireless 802.11g Access Point ETHoA PPPoE
MAC Address 34:1f:33:80:7b:62 00:1b:bf:6c:66:d0 00:1b:bf:6c:66:d2 00:1b:bf:6c:66:d3 00:1e:37:ac:87:34 00:1b:bf:6c:66:d0
IP Address 192.168.1.5 xx.xx.xx.xx xx.xx.xx.xx
Subnet Mask 255.255.255.0 255.255.224.0 255.0.0.0
Default Gateway xx.xx.xx.xx
DNS Server 80.10.246.130
81.253.149.9
IP Address Distribution Disabled Disabled Disabled Disabled Disabled Disabled
VPI.VCI 8.51 8.35 8.35
Best regards,
James
