Can anyone help with the following issue.
Setup:
Force9/PlusNET
Vigor 2820
3.3.5.2_232201
ADSL2+ Annex A
I'm seeing loss of internet access and on checking the router see that the
router is re-authenticating (not re-syncing).
I hooked up syslog and see the following:
Code:
Oct 30 12:51:18 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x93Magic Number: 0x0 00 00 ##
Oct 30 12:51:54 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x95Magic Number: 0x0 00 00 ##
Oct 30 12:51:54 Vigor WAN1 PPPoE <== Protocol:LCP(c021) EchoRep Identifier:0x95Magic Number: 0x1c2d 8e a6 ##
Oct 30 12:52:12 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x96Magic Number: 0x0 00 00 ##
Oct 30 12:52:20 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x97Magic Number: 0x0 00 00 ##
Oct 30 12:52:28 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x98Magic Number: 0x0 00 00 ##
Oct 30 12:52:36 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x99Magic Number: 0x0 00 00 ##
Oct 30 12:52:44 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x9AMagic Number: 0x0 00 00 ##
Oct 30 12:52:49 Vigor WAN1 PPPoE <== Protocol:LCP(c021) EchoReq Identifier:0x3BMagic Number: 0x1c2d 8e a6 ##
Oct 30 12:52:49 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoRep Identifier:0x3BMagic Number: 0x0 00 00 ##
Oct 30 12:52:52 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0x9BMagic Number: 0x0 00 00 ##
.
. snipped out more EchoReq here
.
Oct 30 12:54:20 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0xA6Magic Number: 0x0 00 00 ##
Oct 30 12:54:28 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0xA7Magic Number: 0x0 00 00 ##
Oct 30 12:54:36 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0xA8Magic Number: 0x0 00 00 ##
Oct 30 12:54:44 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoReq Identifier:0xA9Magic Number: 0x0 00 00 ##
Oct 30 12:54:49 Vigor WAN1 PPPoE <== Protocol:LCP(c021) EchoReq Identifier:0x3CMagic Number: 0x1c2d 8e a6 ##
Oct 30 12:54:49 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) EchoRep Identifier:0x3CMagic Number: 0x0 00 00 ##
Oct 30 12:54:52 Vigor PPP Closed : No Echo Response (PPPoA)
Oct 30 12:54:52 Vigor WAN1 PPPoE ==> Protocol:LCP(c021) TermReq Identifier:0xAA ##
Oct 30 12:54:52 Vigor WAN1 PPPoE <== Protocol:LCP(c021) TermAck Identifier:0xAA ##
Oct 30 12:54:52 Vigor WAN 1 is down.
I cant understand why there is no EchoRep coming back yet a TermReq gets an immediate TermAck or is this local ?
I had a similar bout of these symptoms about 2/3 months ago for about 2 weeks where i changed all the local hardware
but didn't get any syslog data.
Anyway any help on where the problem is likely to be much appreciated.
Many Thanks
Carl
