Hello,

I provide technical support remotely for my parents business. Their Draytek 2800 series has been rock solid. The local exchange has just been upgrade to ADSL2+ Annex M.
Current setting ADSL2+ Auto 992.5. Since the upgrade the connection drops very frequently and thus I cannot provide support.

I am seeing some posts saying ASDL2+ and the 2800 simply will not work. I have seen other saying use firmware e67361. I have seen the Draytek pages hinting that disabling wan detect via telnet is the way to go

Which is correct? As I have to take a visit to site to fix this, I need to know for sure!
Thanks,


-- Dano

Model Name : Vigor2800 series
Firmware Version : 2.8.2.1_B1120
Build Date/Time : Thu Nov 20 17:17:59.2 2008
ADSL Firmware Version : E.38.2.23 Annex A

ADSL Information (ADSL Firmware Version: E.38.2.23 )
ATM Statistics TX Blocks RX Blocks Corrected Blocks Uncorrected Blocks
327337 1200760 121 0
ADSL Status Mode State Up Speed Down Speed SNR Margin Loop Att.
ADSL2+ SHOWTIME 888800 15231400 10.5 18.0

Any Draytek support staff on this board that can provide a reply?

Router is stable again back on G.DMT, over 200 hours up-time with the following stats


ADSL Status Mode State Up Speed Down Speed SNR Margin Loop Att.
G.DMT SHOWTIME 992000 8128000 12.0 15.0

Thanks,
-- Dan