Hi there,
I am having a strange problem forwarding port 443 to a windows 2008 standard R2 server.
When I scan from for instance www.mxtoolbox.com i can see that the port is active,
if i telnet the port i can also connect.
But for some strange reason it does not relay the trafic to my OWA on exchange 2010.
I replaced the router with a standard ADSL2+ router and it works.
Firewall on the router is disabled and even then i cannot access the OWA.?

Please Help

I would log into the router and then select management and see if you have port 443 set for the Drayteks HTTPS remote management and if so change it to say 8443.

Have you created a NAT rule to forward 443 to your 2K8 server. It does work as I use it

John

Hi John,
Thank's for your reply....I will try to make the changes you suggested.
I am guessing it would work
Thank's again your your help.

Constantine

Hi there i checked but the remote management is set to port 4443 for https... :shock:
Yes I have forwarded the port to the server IP

Hi Konstantin,
Because 3200 supports SSL VPN so you must to change SSL port too
Web Access Control >> General Setup
Port: 8443