DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor3900 IPv6 Tunnel via SixXS ???

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
13 Oct 2012 18:39 #73835 by ghostworks
Vigor3900 IPv6 Tunnel via SixXS ??? was created by ghostworks
I have a Tunnel account with SixXS for IPv6 Tunnel ...

Currently the vigour only has Link-local; Static IPv6; DHCP-IA_PD; DHCP-IA_NA
has anyone been able to setup SixXS via one of these protocols above... thanks

Please Log in or Create an account to join the conversation.

  • ghostworks
  • Topic Author
  • Offline
  • Member
  • Member
More
02 Nov 2012 11:46 #74007 by ghostworks
Replied by ghostworks on topic Re: Vigor3900 IPv6 Tunnel via SixXS ???
has anyone got IPv6 working on either the 3900 or 2960 ???

Please Log in or Create an account to join the conversation.

More
02 Nov 2012 13:48 #74008 by brianm100
Replied by brianm100 on topic Re: Vigor3900 IPv6 Tunnel via SixXS ???
I have 3900 but not doing anything with V6 sorry.

Please Log in or Create an account to join the conversation.

More
03 Nov 2012 15:14 #74017 by the pit
Replied by the pit on topic Re: Vigor3900 IPv6 Tunnel via SixXS ???
Concentrating on my other problems I don't want to add ipv6 to baffle to Draytek techies further. :)

Please Log in or Create an account to join the conversation.

More
15 Nov 2012 13:10 #74222 by mordorf
Replied by mordorf on topic Re: Vigor3900 IPv6 Tunnel via SixXS ???
See the below response from Draytek support regarding a problem with IPv6 tunnels on a 2850.

Code:
Dear XXXXXXX, I test 2850 again. I find a issue, please first see my test result. my test result: 2850 - 3.6.3_RC4 I use my AICCU account to test (1) WAN1 - PPPoE mode + IPv6 AICCU OK (2) WAN1 - MPoA / Static IP + IPv6 AICCU X (3) WAN2 - PPPoE mode + IPv6 AICCU OK (4) WAN2 - Static IP + IPv6 AICCU OK => item (2) can't work. Although 2850's Online Status web show "connection status" and syslog message show "IPv6 WAN1 UP", but router can't ping to any IPv6 website and PC can't ping to any IPv6 IP. so this should be similar status with your router. I also tell RD about this status, they say: maybe MPoA and other type connection use different packet encryption mode, cause MPoA type can't transfer IPv6 packets. they will check the issue asap. I will inform you if get any update.

Please Log in or Create an account to join the conversation.

Moderators: Sami