DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2960 lost settings after reboot

  • rich767
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 Jan 2013 16:00 #74790 by rich767
Vigor 2960 lost settings after reboot was created by rich767
Hi I have a 2960 with LAN Port 1,2,3 set to 1 VLAN and Port 4 to a different VLAN using a different internal IP.
If the router is rebooted I lose these settings and all ports return to the same VLAN.
Is there a way to resolve this?

Thanks

Rich

Please Log in or Create an account to join the conversation.

More
24 Jan 2013 19:01 #74929 by the pit
Replied by the pit on topic Re: Vigor 2960 lost settings after reboot
You are rebooting with use current configuration and not telling it to reset?

Please Log in or Create an account to join the conversation.

More
24 Jan 2013 23:22 #74934 by voodle
Replied by voodle on topic Re: Vigor 2960 lost settings after reboot
Which firmware? If it's not 1.0.6 or something later, you can get 1.0.6 here, I don't trust the 1.0.5.x firmwares:
ftp://ftp.draytek.com/Vigor2960/Firmware/v1.0.6/

Please Log in or Create an account to join the conversation.

Moderators: Sami