Hi Guys,

We have recently purchased a new 2920n.

We have two separate networks setup on the 2920n (see below) my problem is I want to be able to use the printers/file shares on the first network from the second network. I have tried load of options in vlan settings etc but no joy. Any help would be much appreciated at this stage,

Network 1

range: 10.2.2.0
subnet:255.255.255.0
Gateway: 10.2.2.254

Port 1 on draytek

dhcp supplied by sbs2011

Network 2

range: 192.168.10.0
subnet:255.255.255.0
Gateway: 192.168.10.254

Port 2 on draytek

dhcp supplied by draytek


Many Thanks

Does the 2920 have the inter-lan routing option?

It does, but if it's routing between the two - you need to set a static route to the 2920's subnet on the other router for traffic to pass across it. If you don't have access to the router, the best thing to do is use a WAN interface on the 2920 and access that other network via NAT.