DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820n very slow web access

  • flearider
  • Topic Author
  • Offline
  • New Member
  • New Member
More
03 Mar 2013 10:50 #75413 by flearider
2820n very slow web access was created by flearider
hi
just got a draytek 2820n but i'm finding web access very slow ..i'm on be*(bethere.co.uk)
web pages seem to load but then stop and have to refresh 2 or 3 times to get on .. then the just drop out ..
any help would be great thx ..

Please Log in or Create an account to join the conversation.

  • flearider
  • Topic Author
  • Offline
  • New Member
  • New Member
More
03 Mar 2013 12:26 #75415 by flearider
Replied by flearider on topic Re: 2820n very slow web access
ok so i have turned off fastpath but still on a 3db connection .. connecting at 19mb .
also turned off qos on draytek .. web pages are still slow connecting ..and sometimes time out on latest firmware v2820_v3373_232201_A
anything else i should try ?

Please Log in or Create an account to join the conversation.

More
03 Mar 2013 18:58 #75418 by babis3g
Replied by babis3g on topic Re: 2820n very slow web access
You can try turn off DoS as well if will make a change

Points to notice
1- Go to internet access > wan page and check if settings are correct
Also you try manually multi mode to adsl2+ ... and i think is important the MTU be the correct one (what your isp advise)

2- Try download a large file...If id downloading correct and fast try change DNS servers.If DNS servers are slow it will have same symptoms web pages lot loading or be slow

3- check possible packet loss
Use this advise http://www.dslreports.com/faq/1063 but also use same way to test your router and an other ip address out of your home network let say bbc.co.uk

4- As you have latest firmware ... before you install it ... did you was aware about this release notice from draytek?
http://www.draytek.co.uk/support/download/readme_v2820.txt

IMPORTANT NOTE: Do not upgrade directly from 3.3.5 (and earlier) to 3.3.7.3.
Due to differences in the Web UI and functionality the router MUST first be
upgraded to 3.3.5.2 prior to upgrading to 3.3.7.3.

Upgrade your router to Version 3.3.5.2 first, and afterward upgrade the router
to Version 3.3.7.3.




And last a question about my interest
Did you turn off fast path via telnet command? If yes ...is ok to share it? Thanks

Please Log in or Create an account to join the conversation.

Moderators: Sami