DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 - Restrict access by IP address(es)

  • ascend
  • Topic Author
  • Offline
  • New Member
  • New Member
More
06 Mar 2013 19:37 #75498 by ascend
Is it possible to restrict Internet access by IP address, to certain periods during the day.

Basically, I want to turn off Internet access for my children after (say) 9pm, until 9am the next morning.

If the 2820 won't do it, is there a newer / similar model that will?

Please Log in or Create an account to join the conversation.

More
15 Mar 2013 12:27 #75590 by delboy83
Replied by delboy83 on topic Re: 2820 - Restrict access by IP address(es)
It is possible to set this up using the 2820 with a mixture of firewall rules and schedules.

You'll find the schedule under "Applications" and then Schedule - set the times you want the schedule to apply - you can ignore action and idle timeout

Then go to Firewall, Filter Setup, Default Data Filter

Create a new rule using the IP of the device you want o block to any destination and then change the filter to Block Immediately

Enter the schedule you created at the top and save it.

that should be about it - remember that this is easily bypassed by changing IP address.

I haven't got a 2820 in-front of me, so written this off the cuff. Hopefully it's about right - Good luck!

Please Log in or Create an account to join the conversation.

  • ascend
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Mar 2013 12:50 #75591 by ascend
OK, that sounds like a plan, I will give it a go.

At the moment, IP addresses are allocated by DHCP but I can switch to static IP addresses. I assume I could then grant Internet access to a defined set of IP addresses? hence getting round the problem of changing IP address.

Please Log in or Create an account to join the conversation.

Moderators: Sami