I am using a 2830 as my primary Router configured to supply internet with a backup. All works fine.

I have configured the 2820, in my basement to supply internet in the basement and to be on the same network like being able to browse a server next to primary router.
From the secondary router I can "Network Connect" to a PC on the primary Router's network (upwards) [Internet works fine. Printing to the networked printer via shared printer works, although not ideal as the PC that is sharing the printer might be switched off then I am stuck] but I cannot connect to a PC to browse that PC on the secondary network. (downwards)


Info
Primary:
2830
192.168.1.X Subnet 255.255.255.0


Secondary:
2820
192.168.2.X Subnet 255.255.255.0

I tried to configure secondary to do a DHCP Relay, but once that is done I can no longer access the secondary router.
I do not know if that is the correct thing to do either.

Could any of you perhaps assist in setting this rig up?

Thanking in advance

I was able to resolve this, so this post is closed.

Frits