DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2850 - Open up entire internal network?

iswizzle
Topic Author
Offline
Junior Member

12 Jun 2013 17:28 #76537 by iswizzle

2850 - Open up entire internal network? was created by iswizzle

I have a network (NETWORK B) behind a private network (NETWORK A) which I would like to access fully.
How do you do this on a 2850?

NETWORK A
WAN IP = 23.23.*.* <<<< access to internet
LAN IP 10.1.1.1/24

NETWORK B
WAN IP = 10.1.1.2 <<<< access to NETWORK A
LAN IP = 192.168.1.1/24

How do I access anything on the 192.168.1.0/24 (NETWORK B) network from the 10.1.1.0/24 (NETWORK A) network? I want to access all eg TCP, UDP, ICMP etc but can't seem to get it to run.

Please Log in or Create an account to join the conversation.

sicon
Offline
Contributor

13 Jun 2013 12:48 #76551 by sicon

Replied by sicon on topic Re: 2850 - Open up entire internal network?

Are they VLANs?
If thet are then just enable the inter VLAN routing.
Otherwise you need to do Static routs on the routers to make each interface aware on the LANS

Please Log in or Create an account to join the conversation.

iswizzle
Topic Author
Offline
Junior Member

13 Jun 2013 23:10 #76566 by iswizzle

Replied by iswizzle on topic Re: 2850 - Open up entire internal network?

what static routes would I put in?

Please Log in or Create an account to join the conversation.

Moderators: Sami