Hi,
Originally had a BT homehub which would lockup, drop the wifi, and after a few minutes would reboot itself. Whilst the wifi was dead if you were connected with a cable you could still use the internet. I just assumed that it was a crap router so i replaced it with a 2830n.
Unfortunately im still getting pretty much the same issue. The wifi will drop out and then the router will instantly reboot itself. It does this from about once every 2-3 up to every 15 minutes. It does seam to depend on how many people are using the wifi at any one point.
> sys ver dbg
Router Model: Vigor2830n Version: 3.6.4_sb_232201 English
Profile version: 3.0.0 Status: 1 (0x491e5e6c)
Router IP: 192.168.1.1 Netmask: 255.255.255.0
Firmware Build Date/Time: Mar 18 2013 12:47:45
Router Name:
Revision: 34461 drayos2011
ADSL Firmware Version: 232201_A Annex A
firmware exception debug info
EPC=80437adc, Cause=b0000028, Status=1000fe03, BadAddr=00000000, RetAddr=80437ad8
exception id=10(RI: Reserved Instruction)
exception occured in IdleTask Timeout, task_id=118, SP=0x80988a4c(13772 bytes free, 1588 used bytes)
system tick =111796
CURRENT_VERSION : 3.6.4_RC3
get from address : 80004000
Dump CPU registers:
$ 0: 00000000 fffffffe 00000000 816f0000
$ 4: ffffffff 80780134 0001b4b3 00000001
$ 8: 00000002 00000010 00000000 00000002
$12: 00000001 00000001 00000000 00000000
$16: 81b42a28 ffffffff 80988b34 00001f85
$20: 000001bb 00000002 81b42e54 00000000
$24: 809887cc 81c04f17 81b42a28 804308a0
$28: 80977000 80988a4c 81b42b60 80437ad8
List a possible caller functions:
List backtrace functions:
func( 0)=80437adc
This is the debug info from the router, was hoping somebody would be able to shine a light on this and give me some pointers.
Cheers
