Well, those are the sorts of issues people pay the UK office/technicians to sort out

Its only issues you'd expect from a fresh new product, running as a router with my HP v1900-48G is running fine however i still got a Airfiber to add and another VDSL Line, the Cabinet has a Mikrotik CCR which i was going to use originally with 2 x Vigor130's , but if Vigor130 doesn't like the CCR I do have a Vigor3900 at another location and bring over and put a 2860 in its place

I've now removed the Mikrotik CCR and installed a Vigor2860 , still vigor130 doesn't work via PPPoE pass-through, I had to setup Vigor130 as a Router and connect to the 2860 Wan2 , so can't use port forward etc

i thought i had reply earlier ... via telnet can you try the command ... adsl bridge ... if works see if are any options to set from there but i think is not much hope

thanks when i get a chance to try i will give it a shot

Thought I'd post a update on my Second location ( Vigor 2860 with Vigor130 {German Model} )

My home Setup has been going fine so far with the 2860 and Vigor130 utilizing 2 x Business VDSL Lines,
both 2860 and 130 have beta firmware sent to me at the time to get them to work, so likely the latest firmware will now be covered