Is it possible to set target SNR with 2820n using a telnet command?
I'm on TalkTalk running firmware 3.3.7.3_232201- I've had TalkTalk reduce SNR to 6dB which I usually get away with but weather can cause issues and I'd rather set the negotiated speed myself than keep asking Talktalk.
ADSL stats for info (IFTN DSLAM):-
adsl status
ATU-R Info (hw: annex A, f/w: annex A)
Running Mode : ADSL2+(G.992.5) State : SHOWTIME
DS Actual Rate : 7709333 bps US Actual Rate : 1001904 bps
DS Attainable Rate : 7620000 bps US Attainable Rate : 1000000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 32 US Interleave Depth : 4
NE Current Attenuation : 42 dB Cur SNR Margin : 5 dB
DS actual PSD : 20. 4 dB US actual PSD : 12. 8 dB
ADSL Firmware Version : 232201_A
ATU-C Info
Far Current Attenuation : 21 dB Far SNR Margin : 6 dB
CO ITU Version[0] : 00004946 CO ITU Version[1] : 0000544e
DSLAM CHIPSET VENDOR : < IFTN >
home>
adsl status
ATU-R Info (hw: annex A, f/w: annex A)
Thanks!
