Connecting by wireless to Panasonic Smartviera TV from an A-800

Hi, The setup is a Virgin Superhub in modem mode connected to a Vigor 2830 (wired - no wifi) connected to the AP-800. I use the AP-800 set in AP mode to connect to 2 iPhones as a wireless enty point to a home wired network and on to the Internet. The wireless network is in mixed mode :SSID 1 works fine for the iphones. As SSID 2 I can get the TV (model Panasonic SmartViera TX-L42FT60B) to connect to the network but it cannot see the internet when connected wirelessly - It works fine if connected by wired ethernet. Can anyone explain the setup steps and values I will need to get the TV wireless connection wirelessly to work without breaking iphone connection. I'm not a network expert, so the problem is most likely that I'm entering a wrong value somewhere along the setup process or just missing out something important, many thanks

not sure if will help you (wifi setup)
https://www.youtube.com/watch?v=SXB01AM_tIs
https://www.youtube.com/watch?v=I47OQsTDdPw
https://www.youtube.com/watch?v=VzAgGq85Hxc
http://youtu.be/VzAgGq85Hxc?t=3m21s

also if you have the same SSID at the ap 800 make sure it picks the signal from the ap800 & not from the 2830, maybe that is why can not access via wif the ap800?
What i mean is if both have same SSIID passowrd, then at the tv may see only as one signal while really are 2 (2930 & ap 800)

if that is the issue picking wrong signal, disable the wifi at the 2830 or just turn it off temporary, then the tv should find only the signal of the ap800 (even the internet not works temporary)