Hi Folks,

This probably very easy but I cannot see how to do it.
I want to assign a password that will give individuals internet access. Is there a way to do it on an 2840?

:?:

i am not sure but check at System Maintenance >> Admin Setting, if is anything you can do

If you mean for wifi then go at Wireless LAN >> General Setup, ebable SSID 2, name it ... then at Wireless LAN >> Security Settings, preshared key set a different
With this way guests will have their own network and different key
You also can at Wireless LAN >> Bandwidth Management, SSID 2 to set speed limit for the internet if they downloading a lot

Thanks for your help.

What I need is just to limit internet access by password. There is no WiFi on that router.

Sorry ... If not one reply to your original question i have an other alternative

i am not sure if this can be done, but what you can do is register their devices via bind ip to mac (see normal mode)
http://www.draytek.com/.upload/pdffiles/c0671fe79c540364c1b068d1d87d485b.pdf
then use session limit, bandwidth limit or via firewall to set up rules via their register ip