Hi - I have some difficulties with my Internet connection https://drive.google.com/file/d/0B45...ew?usp=sharing
Below are the other results I got from my ISP.
This goes on since quite some time now and there has been an engineer on site but no error was found....
I have just purchased a Vigor 120 modem - I am currently using a TP link 8817.
Can I set the vigor into a logging mode to run these tests myself?
Thanks,
Oliver
WBC 160K - 24M Low delay (INP 0) 9dB Downstream, UC Medium delay (INP 2) 9dB Upstream (ADSL2+)
xDSL Status Test Summary
Sync Status: Circuit In Sync
General Information
NTE Status: NTE Power Status: PowerOn Bypass Status:
Upstream DSL Link Information Downstream DSL Link Information
Loop Loss: 20.3 38.6
SNR Margin: 11.5 8.1
Errored Seconds: 0 0
HEC Errors: 0
Cell Count: 8639 5247
Speed: 888 11236
Maximum Stable Rate (KBPS): 9088 Fault Threshold Rate (KBPS): 7270
Mean Time Between Retrains (Seconds): 1511 Mean Time Between Errors Upstream (Seconds): 198
Indicative Line Quality: C Mean Time Between Errors Downstream (Seconds): 41
Estimate:
WBC ADSL 2+ Up to 6 -- 3 to 8.5
Summary:
Connection has perdiods of heavy DCN.
