DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor2862 Syslog errors since 3.9.6_BT
- bookit
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 41
- Thank you received: 0
06 Apr 2021 13:48 #99013
by bookit
Vigor2862 Syslog errors since 3.9.6_BT was created by bookit
Since I upgraded my Vigor2862 to 3.9.6_BT I've started to see lots of two syslog messages
[Pass][Unknown DNS query type][Hostname= followed by url across many sites internal and external to my LAN
[CSM_AE][Insufficient Memory](4)
Anyone else have these and any suggestions on cause please?
[Pass][Unknown DNS query type][Hostname= followed by url across many sites internal and external to my LAN
[CSM_AE][Insufficient Memory](4)
Anyone else have these and any suggestions on cause please?
Please Log in or Create an account to join the conversation.
- akwe-xavante
- Offline
- Member
Less
More
- Posts: 107
- Thank you received: 0
14 Apr 2021 11:47 #99066
by akwe-xavante
Replied by akwe-xavante on topic Re: Vigor2862 Syslog errors since 3.9.6_BT
Draytek have had issues with a previous firmware (Now removed) and some seem to be having issues with this one too re syslog so....
I use syslog and the data flow monitor too and updated in this way....
I updated my firmware to 3.8.6_BT 7 days ago and mine's stable but........
I disabled syslog and the data flow monitor first, rebooted then i used the RST firmware to update.
After rebooting i reconfigured the router and then at the end i re-enabled syslog and the data flow monitor.
Been stable since update.
Two very noticeable differences, before update the router was consistently using i think it was 3% of the CPU and 86% of the available memory.
After update the router is now using 13% of the CPU and only 56% of the available memory, a significant difference for whatever reason!!
I use syslog and the data flow monitor too and updated in this way....
I updated my firmware to 3.8.6_BT 7 days ago and mine's stable but........
I disabled syslog and the data flow monitor first, rebooted then i used the RST firmware to update.
After rebooting i reconfigured the router and then at the end i re-enabled syslog and the data flow monitor.
Been stable since update.
Two very noticeable differences, before update the router was consistently using i think it was 3% of the CPU and 86% of the available memory.
After update the router is now using 13% of the CPU and only 56% of the available memory, a significant difference for whatever reason!!
Please Log in or Create an account to join the conversation.
- Hubertus
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
19 Oct 2024 12:11 #104034
by Hubertus
Replied by Hubertus on topic Vigor2862 Syslog errors since 3.9.6_BT
I am still seeing these as well on 3.9.9.7_BT - I am also having lots of "[CSM_AE][Block][FreeGate][@S:R=2:3" messages even though that rule is not enabled in my App filters and in fact the filter rule should not be using App Enforcment at all it is a pass immeadiate rule with no filters enabled.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek