DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Suitable Router for CGNAT
- TagHillian
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
01 Nov 2024 13:54 #104098
by TagHillian
Suitable Router for CGNAT was created by TagHillian
I am considering using a Vigor 2927ax (
https://www.draytek.co.uk/products/business/vigor-2927ax
) to connect to my ISP. My ISP provides a FTTP, Full Fibre, UltraFast Broadband service, but uses CGNAT.
Will this be a suitable router to connect to this service?
Will this be a suitable router to connect to this service?
Please Log in or Create an account to join the conversation.
- John
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 1
02 Nov 2024 10:57 - 02 Nov 2024 11:02 #104099
by John
Replied by John on topic Suitable Router for CGNAT
Both my 2925 and 2865 connect to CGNAT FTTP providers but you will lose the easy access to internal services a fixed IP address gives. If you don't need that then I can't see why a 2927 would not connect to a FTTP provider using CGNAT. You will just be connected via a shared IP address instead of a fixed dedicated one.
Last edit: 02 Nov 2024 11:02 by John.
Please Log in or Create an account to join the conversation.
- TagHillian
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
02 Nov 2024 11:01 #104100
by TagHillian
Replied by TagHillian on topic Suitable Router for CGNAT
Thank you for your response, John, it's much appreciated.
Please Log in or Create an account to join the conversation.
- markhawkin
- Offline
- Junior Member
Less
More
- Posts: 40
- Thank you received: 11
03 Nov 2024 23:49 #104102
by markhawkin
Replied by markhawkin on topic Suitable Router for CGNAT
The 2927 router will be fine (as will any recent Draytek really).
The point I would consider is througput.
I've not had much luck with the hardware acceleration so assuming you are using a UK "AltNet" (my guess because most of the older ISPs don't have to use CGNAT) you may find that even the 2927 doesn't give the full package speed.
If you have 500Mb/s or below then it will probably be fine. A 1Gb/s service may not achieve the 940 Mb/s (ish) you might be expecting.
The point I would consider is througput.
I've not had much luck with the hardware acceleration so assuming you are using a UK "AltNet" (my guess because most of the older ISPs don't have to use CGNAT) you may find that even the 2927 doesn't give the full package speed.
If you have 500Mb/s or below then it will probably be fine. A 1Gb/s service may not achieve the 940 Mb/s (ish) you might be expecting.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek