Hi - Not sure if this is the right place to post my question.

I have a Vigor 2862ac Firmware 3.9.9.2 BT and an AP800 firmware 1.1.6.2
I have enabled AP Management and Auto Provision in the AP800.

I have it all working by logging into the AP800 and configuring it but am now trying to use Central Management in the 2862 to configure the AP800.

In the 2862 I can see the AP800 and its status is shown as Online.
I can create a profile for this (Profile 2) and set everything and can send it to the AP800 but the event log shows it failed. Any advice why?

Do I need to tick "Apply ACL Confuguration only" on the send to AP screen?

I'm using Firefox on windows 11 pro.

This has also got me thinking, at the moment I am using only one 2.4GHz SSID and none of the 5GHz SSID's. I'm also looking at advantages of 5GHz and looking to try that out. I have also bought a AP903 and thinking of extending coverage throughout the house and maybe look at Mesh. So I have lots of questuions and reading to do.
I know the AP800 does not support Mesh.

Any advice on my first question above is appreciated.

Also any pointers on reading matter for the additional information also much appreciated.


Thanks for your help.

Happy New Year.