DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
drop and start vpn via command or schedule
- k_roman
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
19 Dec 2011 13:05 #70507
by k_roman
drop and start vpn via command or schedule was created by k_roman
Can anybody tell me how I can drop and start lan to lan vpn connection by schedule or via telnet commands?
Thanks
Roman
Thanks
Roman
Please Log in or Create an account to join the conversation.
- ian_m
- Offline
- Junior Member
Less
More
- Posts: 34
- Thank you received: 0
20 Dec 2011 11:30 #70520
by ian_m
Replied by ian_m on topic Re: drop and start vpn via command or schedule
On my 2750 its Applications -> Schedule -> Add Schedule and select VPN UP or VPN DOWN as scheduled action.
Please Log in or Create an account to join the conversation.
- k_roman
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
20 Dec 2011 15:00 #70522
by k_roman
I dont seem to have "VPN UP or VPN DOWN" in Action list in Shedule on my 2820.
thanks
Replied by k_roman on topic Re: drop and start vpn via command or schedule
On my 2750 its Applications -> Schedule -> Add Schedule and select VPN UP or VPN DOWN as scheduled action.ian_m wrote:
I dont seem to have "VPN UP or VPN DOWN" in Action list in Shedule on my 2820.
thanks
Please Log in or Create an account to join the conversation.
- ian_m
- Offline
- Junior Member
Less
More
- Posts: 34
- Thank you received: 0
21 Dec 2011 10:46 #70532
by ian_m
Replied by ian_m on topic Re: drop and start vpn via command or schedule
Just checked and 2820 doesn't have this functionality.
However you can schedule firewall enable/disable, you might be able to block VPN access on a schedule ?
However you can schedule firewall enable/disable, you might be able to block VPN access on a schedule ?
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
22 Dec 2011 09:13 #70542
by voodle
Replied by voodle on topic Re: drop and start vpn via command or schedule
The 2820 has the same functionality on the dial-out VPN side, check the bottom right of the Dial-Out section of the LAN to LAN VPN profile, you can set up schedules in there, I'm not sure whether you'd use force up or force down or a combo of the two but this guide suggests you'd use both: http://draytek.com/user/SupportAppnotesDetail.php?ID=926
I think that with a VPN set to Always On, you'd just use a Force Down schedule rather than on/off ones.
I think that with a VPN set to Always On, you'd just use a Force Down schedule rather than on/off ones.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek