Hi Guy's
I'm new draytek, i have a vigour 2860 router that needs to connect to a cisco 1841 via ipsec to address a ip network for voice and some data
i have them connected at the moment via a cisco 3640 bu need to use a the draytek, i can't see any sample configs anywhere so if any one can help a newbie on here that would be great i've attached the cisco config interface
crypto isakmp policy 1
hash md5
authentication pre-share
crypto isakmp key rossano address 0.0.0.0 0.0.0.0
!
!
crypto ipsec transform-set rtpset esp-des esp-md5-hmac
!
crypto dynamic-map rtpmap 10
match address 115
!
!
crypto map rtptrans 10 ipsec-isakmp dynamic rtpmap
!
FastEthernet0/0
ip address 81.137.126.251 255.255.255.248
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 212.54.187.254 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
!
interface FastEthernet0/0/0
!
interface FastEthernet0/0/1
!
interface FastEthernet0/0/2
!
interface FastEthernet0/0/3
!
!
ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
ip route 0.0.0.0 0.0.0.0 81.137.126.254
!
!
no ip http server
no ip http secure-server
!
access-list 115 permit ip 212.54.187.0 0.0.0.255 192.160.10.0 0.0.0.255
access-list 115 deny ip 212.54.187.0 0.0.0.255 any
access-list 120 deny ip 212.54.187.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 120 permit ip 212.54.187.0 0.0.0.255 any
!
route-map nonat permit 10
match ip address 120
